Working principle of the coal mill


Release date:

2021-07-06

  Ball mill

  This machine is a horizontal cylindrical rotary unit driven by an external gear system, featuring two chambers and a grate‑type ball mill. Material enters the mill’s first chamber uniformly via a hollow feed shaft equipped with a spiral feeder. Inside this chamber, either stepped or corrugated liners are installed, housing steel balls of various sizes. As the cylinder rotates, centrifugal force lifts the balls to a certain height before they cascade down, delivering impact and grinding action on the material. After coarse grinding in the first chamber, the material passes through a single‑layer partition plate into the second chamber, which is fitted with flat liners and contains steel balls for further grinding. The ground product is discharged through a discharge grate, completing the milling process.

  Roller mill

  The electric motor drives the grinding disc via a reducer. Material is fed through a sealed feeder into the center of the disc, while hot air enters the mill through the air inlet. As the disc rotates, centrifugal force causes the material to move toward the outer edge; as it passes through the annular grooves on the disc, it is crushed by the grinding rollers. The crushed material is then entrained by the high‑velocity airflow from the wind ring at the disc’s periphery. Coarse particles fall back onto the disc for re‑grinding, while finer particles are carried with the airflow through the upper separator. Under the action of the rotating rotor, coarse powder is directed into the conical hopper and returned to the disc for further grinding. The qualified fine powder exits the mill with the airflow, is collected by the dust‑collection system, and constitutes the final product. Moisture‑laden material is dried as it contacts the hot air stream; by adjusting the temperature of the hot air, the mill can accommodate materials with varying moisture levels and achieve the desired product moisture content. By modifying the separator settings, the desired particle size distribution for different products can be attained.

Latest Updates

Copyright © 2026 Haixin Power Equipment Manufacturing (Nantong) Co., Ltd.

Business license